SF6 Leakmate Leak Detector
Low Cost Portable SF6 Leak Detector with Selectable Sensivity and Automatic Zero

The easy to use, processor-controlled Ion Science SG6 Leakmate Leak Detector features both an audible alarm and an LED bar graph display, allowing estimation if a small, medium or big leak is being detected.
The SF6 Leakmate automatically compensates all ambient influences like temperature changes or movement of air in the room.
Intelligent control sets up the instrument appropriately for the ambient situation. It then uses the present gas concentration as its zero line and begins to look for even higher gas concentrations, which by all means occur when a leak is approached. This will again be indicated audibly and visually. It is thus possible to determine leaks even in an already seriously contaminated area.
For further information about the Ion Science Leakmate Leak Detector, please contact your local Air-Met Scientific office.
Ion Science SF6 Leakmate Key Features
- Cost effective leak detection solution
- Easy to use
- Leakrates down to 1 x 10E-6 cc/s
- Automatic compensates all ambient influences like temperature changes or movement of air in the room
- Selectable sensitivity
- Automatic zero
- Battery test display
- Audio alarm
- LED bar graph display
Ion Science SF6 Leakmate Leak Detector Specifications
Detector | High voltage ionisation |
Sensitivity | 1 x 10E-6mbar I,s for SF6 |
Response Time | Approx. 1s |
Audio | Sound pitch proportionally follows leak rate |
Display | 7 position LED bar graph |
Sniffing Probe | 355mm flexible pipe |
Operating Temperature Range | -20°C to 50°C |
EMC Rating | CE declaration of conformity |
Dimensions | 330 x 280 x 125 including transport case |
Weight | 2100 g including accessories |
Applications of the Ion Science SF6 Leakmate Leak Detector include:
- Leak detection on SF6 switchgear
- Service and maintenance in SF6 switchgear production
- Mobile leak detection on test equipment for differential pressure, mass flow etc.