Detector Tube 251U For Diesel Fuel
Kitagawa Gas Detector Tube For The Detection Of Diesel Fuel.
The Kitagawa Detector Tube 251U for diesel is available for the monitoring of residual and leakage of tank stored diesel fuels. For the same purpose, jet fuels and/or kerosine can also be measured.
Detector tube 251U has a detectable limit of 0.3 ppm (400ml) with readings going from white > pale brown + pale green (at the top).
Detector tubes and pumps are available from all Air-Met offices Australia wide.
For more information on the Detector Tube 251U For Diesel Fuel, contact your local Air-Met office.
- Measuring range of 0.5 ~ 30ppm
- ISO 9001 and ISO 14001 certified
- Sampling time of 1.5 minutes/1 pump stroke
- 2 years shelf life
| Tube 251U Diesel Fuel Specifications | ||
|---|---|---|
| Performance | ||
| Measuring Range | 0.5-12.5 ppm | 1.0-30 ppm |
| Number of Pump Strokes | 4 (400ml) | 2 (200ml) |
| Sampling Time | 1.5 minutes / 1 pump stroke | |
| Detectable Limit | 0.3 ppm (400ml | |
| Shelf Life | 2 years | |
| Operating Temperature | 0~40°C (32-104°F) | |
| Temperature Compensation | Necessary (See "TEMPERATURE CORRECTION TABLE In Specifications") | |
| Reading | Direct reading from the scale calibrated by 2 pump strokes | |
| Colour Range | White → Pale brown with pale green top | |
| Relative Standard Deviation | RSD-low:10% RSD-mid.:10% RSD-high:10% | |
| Chemical Reaction | Iodine pentoxide is reduced. CHn+I2O5+H2SO4 •nSO3→ I2 | |
| Calibration of the Tube | Gas chromatography | |
| Interference & Coexistence |
Propane, isobutane, hexane, octane, gasoline or carbon monoxide will product a similar strain and will give higher readings. Each coexistence of methane, acetone, alcohols, benzene, toluene, styrene, xylene, ammonia, hydrogen chloride, hydrogen sulphide, sulphur dioxide or carbon dioxide does not affect the reading. |
|
| Qty Per Box | 10 detector tubes | |
- Detection of diesel fuel
- Detection of jet fuel
- Detection ok kerosine
