Falco 2 Fixed VOC Detector

Falco 2 Fixed VOC Gas Detector Overview

The Ion Science Falco 2 is the latest generation of fixed PIDs that continuously detect a wide range of volatile organic compounds (VOCs).

Unique to Falco 2 is its revolutionary Typhoon Technology safeguarding the sensor from condensing moisture for added reliability in severe weather conditions. Additionally, the Falco 2 incorporates world-class MiniPID 2 Sensor in 10.6 eV, 11.7 eV and 10.0 eV variants which allows the detection of over 700 VOCs. The Ion Science Falco 2 gives you cutting-edge performance, reliability, accuracy and results you can trust so you can be sure workforce and plant receive on-going maximum protection. Ion Science's patented Fence Electrode Technology provides humidity resistance and an anti-contamination design, ensuring drift is minimised and run-time extended, saving both time and cost to your business.

Offering the ultimate in safety the Ion Science Falco 2 Fixed VOC Detector overcomes false readings found with other PIDs. Its multi-coloured LED status display can be seen from a distance of 20 metres in sunlight ensuring you are clearly alerted to hazards present.

Falco 2 has an externally located intrisically safe sensor for quick and easy servicing without the need for a hot work permit. Dual certification allows Falco 2 to be serviced and calibrated in a hazardous environment without having to remove power.

The Falco 2 has an intuitive user interface making it easy to operate. It has five magnetic switches with LED confirmation, a high contrast OLED screen and graphical interface ensuring installation and servicing are both quick and easy.

RS485 (Modbus®), 4-20 mA and Relay outputs are standard for all models. The Relay outputs are configurable for either high and low alarms, fault conditions or test cycle synchronisation.

The Ion Science Falco 2 Fixed VOC Detector offers the ultimate in flexibility and can be purchased as one of four detection ranges in either a pumped or diffused variant. With a diffused model, servicing costs are kept to a minimum with no pump to maintain.

Type	0-10 ppm	0-50 ppm	0-1000 ppm	0-3000 ppm
Sensitivity	0.001 ppm	0.01 ppm	0.1 ppm	1 ppm
Pumped



Diffused

For more information on the Falco 2 Fixed VOC Detector, contact your local Air-Met office.

Features

Falco 2 Fixed VOC Gas Detector Features

Ultimate Performance

The only VOC detector specifically designed for extreme weather
Typhoon Technology stops condensation forming within the PID
Cutting-edge sensor performance minimises drift & downtime

Ultimate Safety

Eliminates false readings found with other PIDs
Multi-coloured status display seen from 20 metres in sunlight
Fitted with long-life lamp for two years continuous use
Ex d approved

Ultimate Flexibility

Pumped or diffused models available
Pumped unit ideal for difficult to access locations
Diffused model reduces servicing costs
Four detection ranges available
Selectable response factor for varying VOC selection

Specifications

Falco 2 Fixed VOC Gas Detector Specifications

Technical Specifications
Sensor	Photoionisation with 10.6, 10.0 or 11.7 eV lamp
Detection Ranges and Sensitivity*	10.0 ppm	0.001 ppm
	50.0 ppm (10.0 eV lamp)	0.01 ppm
	200 ppm (with 11.7 eV lamp)	0.1 ppm
	1000 ppm	0.1 ppm
	3000 ppm	1 ppm
Detection Time (T90)	<30 seconds (diffused)**
	<10 seconds (pumped)**
	60 seconds (11.7 eV lamp)
User Interface	Display:	OLED high contrast white on black: 128 (w) x 64 (h) pixels
	Screen size:	35mm (w) x 17.5mm (h)
	5 magnetic switches with LED confirmation (up, down, left, right & enter).
Status Indicator	Bright visible status indicator: RED, AMBER, GREEN
Certification	ATEX: II 2G Ex db ib IIC T4 Gb IECEx: Ex db ib IIC T4 Gb
Environmental Specification	Diffused:	-40 °C to 50 °C
	Pumped:	-20 °C to 50 °C
	11.7 eV lamp	-20 °C to 50 °C
	0-100% RH and condensing humidty
Mechanical Interface	2 x cable entry points with 3/4” NPT threads (left and right)
Dimensions	Diffused:	223 (h) x 192 (w) x 115 (d) mm
	Pumped:	325 (h) x 192 (w) x 115 (d) mm
	11.7 eV lamp:	223 (h) x 192 (w) x 115 (d) mm
Mounting Points	2 x M8, 2 x M25 (with 11.7 eV lamp)
Input Power	Working voltage: 8 to 40 Vdc Max. power: 7 watts (8 watts with 11.7 eV lamp), Typical 2 watts
Outputs	4 to 20 mA RS 485 Modbus® 2 programmable relays