Parallel Particle Impactor (PPI), Respirable, Aluminum, 2 L/min
Parallel Particle Impactor (PPI), aluminum, four-stage, for respirable sampling at 2 L/min.
SKU
PPI2
Parallel Particle Impactor (PPI), aluminum, four-stage, for respirable sampling at 2 L/min. The PPI provides the closest match to the entire ACGIH/CEN/ISO respirable or thoracic curves compared to any other sampler available. Requires substrates, filters, and supports purchased separately
For more information on the Parallel Particle Impactor, contact your local Air-Met office.
- Collection efficiency precisely matches ISO/CEN 7708:1995 size-selection criteria
- Respirable PPI Samplers meet specifications in the 2013 OSHA NPRM for silica
- Economical and reusable – use with any suitable 37-mm filter
- Load with disposable pre-oiled impaction substrates
- Reduce particle bounce and buildup effects
- Only 3.3 ounces (93.6 grams) – ideal for both personal and area sampling
- Selection of flow rates available to meet specific applications
- 8 L/min respirable PPI: Enhances sensitivity (for short-term and/or low concentration sampling) using high flow pumps; ideal for proposed lower OSHA PEL for silica
- 4 L/min respirable PPI: Enhances sensitivity and can be used with personal pumps
- 2 L/min respirable PPI: Standard TWA sampling
- 2 L/min thoracic PPI: Metalworking fluids (NIOSH Method 5524) and thoracic TLV-TWA compounds such as sulfuric acid and cotton dust
- Patented disposable PPIs are available pre-assembled with:
- Filter and pre-oiled substrates for chemical analysis
- Pre-oiled substrates only – add your own weighed filter for gravimetric analysis
- Reusable aluminum PPIs are available
- Performance published in Journal of Physics and submitted to OSHA docket on silica
Sampling Rate | 2 L/min respirable or thoracic, 4 L/min respirable, or 8 L/min respirable |
Sample Pump | Universal XR or AirChek for 2 L/min and 4 L/min, Leland Legacy for 8 L/min |
Sample Time | Dependent on method used |
Sample Media | 37-mm, 5.0-µm PVC filter or 37-mm, 2.0-µm PTFE filter (NIOSH 5524) or 37-mm, 0.8-µm MCE filter |
Use cellulose pad or stainless steel screen for support. | |
Back pressure on PTFE filters can vary within the same lot. | |
Tubing | 1/4-inch ID |
Impaction Substrate | Four 3/8-in diameter pre-oiled porous plastic discs |
Analysis | Gravimetric or chemical |
Body Material | Conductive aluminum |
Dimensions | Height: (clip to exhaust): 4.25 in (10.8 cm) |
Diameter: 1.8 in (4.6 cm) | |
Depth: 1.2 in (3.0 cm) | |
Weight | 3.3 oz (93.6 gm) |
- Respirable sampling