12 Volt DC SS Geosub Pump and Controller
The stainless steel (SS) Geosub sampling pump is the most versatile single stage 12 Volt DC pump in the industry. It allows you to sample with confidence even in the harshest well conditions. Operates with the Geotech SS Geosub Controller.
This stainless steel (SS) sampling pump is the most versatile single stage DC pump in the industry. Designed with all stainless steel components, the SS Geosub allows you to sample with confidence even in the harshest well conditions. The SS Geosub operates with the Geotech SS Geosub Controller.
Controller
The SS Geosub Controller is designed specifically for use with Geotech’s SS Geosub Pump. It provides a safe conditioned variable DC output power from an AC power source. Built-in sensing gives the operator accurate and precise control over the pump during sampling events. An average 1000 Watt gasoline powered generator with 1 gallon (3.8L) of petrol can operate the SS Geosub Controller and Geotech’s sampling pump at full power for up to 18 hours continuously (generally much longer runtimes can be expected as the controller is used to reduce water flow for low flow sampling).
For more information on the 12 Volt DC SS Geosub Pump and Controller, contact your local Air-Met office.
Pump and Controller
- Most versatile pump in the industry, sample from depths to 200 feet (61m)
- Low flow sampling rates to 10 mL/min
- User enabled dry-run protection
- Easy to decontaminate
- Optional Drop Tube Assembly for greater depth
- Field replaceable motor lead kits available
- Optional portable reel systems or dedicated well systems available to meet your needs
- Optional DC to AC Inverter can be connected to a vehicle battery
Geosub Controller
-
Converts AC Voltage to variable up to 300 watt DC voltage output
-
Short circuit protection for your safety
-
Heavy duty rated power cable for years of service
-
2-line x 16-character wide temperature range alpha-numeric digital display
-
Push button Up/Down control
-
Internal processor saves individual well parameters
-
Optional DC to AC Inverter can be connected to a vehicle battery
| Geosub Pump Specifications | ||
|---|---|---|
| Electric | Full Load Rating | 2/3 HP |
| Maximum Amp Draw | 35 amps DC | |
| Overload | Incorporated into the SS Geosub Controller | |
| Discharge Port Connection | 1/4" female NPT (includes 3/8" barb) | |
| Operating Conditions | Min. Ambient Fluid Temperature | 1°C |
| Max. Ambient Fluid Temperature | 80°C | |
| Wetted Parts | 316 Stainless Steel, PTFE, Vitron® | 316 Stainless Steel, PTFE, Vitron® |
| Dimensions & Weighted (Pump and Motor) | Dimensions of Pump | 34cm L x 4.5cm OD |
| Net Weight of Pump w/o Lead | 1.8kg | |
| Cable Specifications | ||
|---|---|---|
| Material | Two 12 gauge conductors with ETFE jacket and integrated safety cable | |
| Weight with Georeel & SafetyCable | 100' (30.5 m) of 12 AWG & Safety Cable | 8.3kg |
| 150' (45 m) of 12 AWG & Safety Cable | 9.8kg | |
| 200' (61 m) of 12 AWG & Safety Cable | 11.3kg | |
| Geosub Controller Specifications | |
|---|---|
| Input Power Range |
100-130 Volts AC - 50/60 HZ 310 Watts, 2.6 amps nominal full load 115 Volts AC
200-250 Volts AC - 50/60 HZ 310 Watts, 1.3 amps nominal full load 230 Volts AC
|
| Output Power | Variable 0-46V DC @ <300 Watts |
| Output Power @ Max. Voltage | 10 amps maximum |
| Operating Temperature | -20°F to 100°F (-29°C to 38°C) ambient air temp. |
| Humidity | Up to 90% humidity |
| Weight of Unit | 7.46 kg |
| Size of Unit | 41cm L x 33cm W x 18cm H |
| Input Protection | 5A CB |
- groundwater monitoring
- low flow sampling
