Eagle 2 Gas Monitor

Monitors Up to 6 Different Gasses with a Powerful Long-Life Pump


The Eagle 2 Gas Monitor by RKI Instruments has been designed to monitor up to 6 different gasses. Its digital display makes analysing results easy to provide for greater efficiency and will sustain 16 hours on Alkaline or 18 hours of capability on NiMH. The Eagle 2 supports 5 languages and has a powerful long-life pump up to 125' range with PPM, % LEL, or % Vol. auto-ranging combustible detection.

The Eagle 2 has also been designed as intrinsically safe with a CSA approval and an ergonomic RFI/EMI/chemical/weather resistant enclosure to ensure the safety of users. It also features auto calibration and single gas calibration to ensure operational accuracy at all times.

Applications include:

  • Refineries
  • Fire and Hazard
  • Landfills
  • Natural Gas

For more information on the Eagle 2 Gas Monitor, contact your local Air-Met office. 

Eagle 2 Gas Monitor Features include:

  • Monitor up to 6 different gasses
  • Ergonomic design
  • Intrinsically safe design
  • Password protection
  • Auto calibration/single gas calibration
  • Digital display
  • Alarm LED's with wide visibility
  • 3 Operating modes (normal, leak check, and bar hole sampling)
  • Powerful internal sample pimp with 125' range
  • Made in the USA with high quality standards

Eagle 2 Gas Monitor Specifications


Weatherproof, chemical resistant, anti RFI / EMI coated high impact polycarbonate - PBT
blend. Can operate in rain or be set into 2.0” of water without leakage. Ergonomically
balanced with rugged top mounted handle.

Dimensions 9.5” L x 5.25” W x 5.875” H (241mm L x 140mm W x 149mm H)
Weight 3.8 Lbs (1.72kg) (standard 4 gas with batteries)
Detection Principle

Catalytic combustion, electrochemical, galvanic, infrared,
photo ionization, and thermal conductivity.

Sensor Life 2 Years under normal conditions.
Sampling Method

Powerful, long-life pump (over 6,000 hours) can draw samples over 125 feet.
Flow rate approximately 2.0 SCFH


Backlit 128 x 64 graphics display. Viewed through a window in case top. Displays
readings & status of all 6 channels simultaneously. Backlight illuminates for alarms and
on-demand with adjustable time. The optional mode allows automatic or manual scrolling
display of just one gas at a time with very large characters.

Language Readout can display in 5 languages (English, French, German, Italian, or Spanish).

2 Alarms per channel plus TWA and STEL alarms for toxics. The two alarms are fully
adjustable for levels, latching or self-reset, and silenceable.

Alarm Method Buzzer 95 dB at 30 cm, four high-intensity LED’s.

4 External glove friendly push buttons for operation, demand zero, and autocalibration.
Buttons also access LEL/ppm, % Vol. alarm silence, peak hold, TWA/STEL values,
battery status, conversion factors, and many other features.

Continuous Operation At 70°F, (21°C) 16 hours using alkaline batteries, or 18 hours using Ni-MH.
Power Source

4 Alkaline or Ni-MH, size C batteries (Charger has alkaline recognition
to prevent battery damage if charging is attempted with alkalines).

Operating Temp. & Humidity -4°F to 122°F (-20°C to 50°C) 0 to 95% RH, non-condensing.
Response TIme 30 Seconds to 90% of range (for most gases) using standard 5 ft hose.
Safety Rating Intrinsically Safe, Class I, Division 1, Groups A, B, C, D.
Standard Accessories

Shoulder strap, alkaline batteries, hydrophobic probe, 5-foot hose, and
internal hydrophobic filter

Warranty Two-year material and workmanship, one year for PID sensor

Eagle 2 Gas Monitor Applications include:

  • Refineries
  • Fire and Hazmat
  • Landfills
  • Natural Gs